Settings, Droppy Beam on the Mac in light and dark: the Droppy Beam hero, the Arrival card with a preview, and the iPhone card with Pair iPhone and Save files to.
All posts

How to set up Droppy Beam on your iPhone and Mac

Droppy Beam takes a few minutes to set up once, and then it is a gesture. You need Droppy on your Mac, Droppy for iPhone on your phone, and the two paired through Droppy Sync.

Short answer
  1. Update Droppy on your Mac to 16.2.2 beta 3 or later and check that Droppy Beam is on in Settings.
  2. Install Droppy for iPhone from TestFlight.
  3. Pair: on the Mac choose Pair iPhone, then scan the code with the phone.
  4. Allow Local Network and Photos on the iPhone when it asks.
  5. Open the Beam tab, hold something, and drag it off the edge toward your Mac.

What you need

A Mac with Droppy
Droppy 16.2.2 beta 3 or later, with an active license, because Beam rides on Droppy Sync. The free 3-day trial includes every feature.
An iPhone on iOS 26
Droppy for iPhone runs on iOS 26 or later. It is iPhone only, with no iPad build.
Droppy for iPhone
100% free, now and always, and currently available on TestFlight.
A network
The same Wi-Fi for the direct path. When the devices are apart, both need an internet connection.

Step 1: switch Beam on, on the Mac

Open Droppy's Settings and choose Droppy Beam in the sidebar. The switch at the top right turns Beam on and off, and it is on by default. Under it the subtitle says "Throw photos, files and text from your iPhone onto your Mac." If it says Beam is off, flip the switch.

Beam is in Droppy 16.2.2 beta 3, so if you do not see the page, update first: the download on this website is always the newest build, and Settings, About, Software update lets you pick the Beta channel. Updates and channels explains the choice.

The Arrival card in Settings, Droppy Beam: a preview of the Light arrival, Arrival animation set to Light, Items arrive at set to Right edge, and Play a sound on arrival on.
Settings, Droppy Beam on the Mac: the Arrival card. The defaults are fine to start with.

While you are here, set Items arrive at to the side your iPhone usually lies on. Right edge is the default, which means the phone throws toward its left. The other choices are covered in arrival styles and settings.

Step 2: install Droppy for iPhone

Open the Droppy for iPhone page on your phone and follow the TestFlight link. TestFlight is Apple's app for apps in testing; install it if iOS asks, then install Droppy from it. Updates arrive through TestFlight from then on.

Step 3: pair the phone with the Mac

Beam uses the same pairing as everything else Droppy for iPhone does, so if your phone already syncs your clipboard and files, skip this step.

The iPhone card in Settings, Droppy Beam: No iPhone paired yet, a Pair iPhone button, and Save files to set to File tray.
The iPhone card on the Beam page. Pair iPhone opens Droppy Sync right there.
  1. On the Mac, in Settings, Droppy Beam, press Pair iPhone. It opens Droppy Sync. You can also get there through Settings, General, Droppy Sync. Create a Sync Library if you have not yet.
  2. Choose Pair iPhone. The Mac shows a QR code with the link written out under it.
  3. On the phone, scan the code with Droppy, or paste the link, and confirm. Nothing joins your library without your approval there.

Your Mac creates the library's key and keeps it in its Keychain. The key reaches the phone inside that code and never reaches a server, and a pairing code works only once. Once paired, the row on the Beam page reads "Paired with" and your phone's name. The full walkthrough, with what syncs and how to revoke a device, is in pairing and sync, and Pair your iPhone has the short version.

Step 4: allow Local Network and Photos

Two iPhone permissions matter for Beam:

  • Local Network. iOS asks when Droppy first looks for your Mac on the network. Allow it, and throws go straight to the Mac over Wi-Fi when both are on the same network. Without it, Beam still works through Droppy Sync's encrypted path, just not as directly, and the Beam tab reminds you: "Turn on Local Network for Droppy, so Beam goes straight to your Mac over Wi-Fi." Change it later in the iPhone's Settings, Privacy and Security, Local Network.
  • Photos. The Photos shelf shows your library so you can pick from it. If you allow selected photos only, Beam shows those and says so, and you can change the selection from the shelf. Nothing leaves your iPhone unless you send it.

Step 5: your first throw

Tap the Beam tab at the bottom of Droppy for iPhone. Pick the Photos, Files or Clipboard shelf. The line under the shelves names the edge to throw toward.

Four screens of Droppy for iPhone: the Beam tab, a stack of five files held, the stack leaving at the left edge, and a ring of light as it is sent.
The first throw: hold, build a stack if you like, drag it off the edge, let go.
  1. Press and hold a photo until it lifts.
  2. Drag it toward the edge. Watch your Mac: the photo peeks in at its screen edge.
  3. Let go near the edge. The Mac plays the arrival and the photo lands in the file tray.

To add files, use Add files or Choose folder on the Files shelf; Beam keeps copies of what you add. To send text, type or paste into the field on the Clipboard shelf.

Tune the feel

In Droppy for iPhone's Settings, the Droppy Beam section has two controls. Send zone sets how early the stack feels the Mac's pull, from near the edge to earlier. Move it toward earlier if throws feel like hard work; keep it near the edge if you send things by accident. Haptics switches the feel of the throw on or off.

When Beam does not show up

The Beam tab saysWhat it meansFix
Open Droppy on your Mac to beam things to it.The phone has not heard from a Mac that takes throws.Open Droppy on the Mac and check that Droppy Beam is on.
Update Droppy on your Mac to beam things to it.A Mac is online but does not take throws: its Droppy is from before Beam, or Beam is switched off.Update the Mac to 16.2.2 beta 3 or later, and check the switch in Settings, Droppy Beam.
Turn on Local Network for Droppy, so Beam goes straight to your Mac over Wi-Fi.Local Network access is off for Droppy.iPhone Settings, Privacy and Security, Local Network.

Two more things worth knowing. With several Macs in your library, the phone throws to the Mac it saw most recently that is online. And if Save files to shows File tray greyed out, that tray is switched off in Settings, File tray. Still stuck? Troubleshooting and The Trench are the places to go.

Learn more about Beam on its own page, with every arrival style and the setup in one place.

Frequently asked questions

Do I need a Droppy license to use Beam?

Beam rides on Droppy Sync, and syncing needs an active Droppy license on the Mac you pair with. Droppy for iPhone itself is free.

Which iPhones work with Beam?

Droppy for iPhone runs on iPhone with iOS 26 or later. There is no iPad build.

Where do I get Droppy for iPhone?

It is on TestFlight. Join through the link on the Droppy for iPhone page, install TestFlight if you do not have it, and install Droppy from there.

The Beam tab says to open Droppy on my Mac. What now?

Your iPhone has not heard from a Mac that takes throws. Open Droppy on the Mac, check that Droppy Beam is switched on in Settings, and give the phone a moment to reconnect.

The Beam tab says to update Droppy on my Mac.

Your Mac is online but does not take throws. If the Mac is on 16.2.2 beta 3 or later already, check that Droppy Beam is switched on in its Settings: a Mac with Beam off is not offered either. Otherwise update it through Settings, About, Software update.

Do I have to allow Local Network?

No, Beam still works through Droppy Sync's encrypted path without it. With Local Network allowed, it goes straight to your Mac over Wi-Fi when both are on the same network, which is quicker.